UPVC Window Handle Replacement
Replacing a broken window handle is a easy task and with the right tools it can be done quickly. However, it is essential to identify the type of handle and the spindle’s length prior to purchasing the replacement window.
Older uPVC window handles have a spur that protrudes and locks on the wedge striker for cockspur. These can be right-handed or left-handed and must be compatible when replaced.
What type of lock and handle do I have?
There are a variety of window handles made of upvc and locks, each with their own benefits and purposes. The type of handle you have will determine the ease to open your windows and whether or not the locking mechanism works in the way you want it to. As time passes and with regular usage, the window handles made of upvc may become damaged or worn out, making them less effective and secure. In some cases they may even fall off completely. If you find that your window handles have fallen off, it is essential to repair them as quickly as you can. This will prevent possible break-ins, and keep your house secure.
It is a good thing that replacing your window handles made of upvc is a simple task that can be done by anyone. You’ll need a few basic tools, but with the appropriate knowledge, it’s an easy task that will only take a couple of minutes. It is important to know the kind of lock or handle you have on your window. This will allow you to choose the appropriate replacement.
Inline Espagnolette Handles
They are usually found on the outside of the window. They have a flat design and feature an opening that is connected to the locking mechanism of the window frame when it is turned. Inline upvc handles have spindles that run through the middle of the handle and into the frame of the window to activate the latch.
Cockspur Handles
They are typically found on older uPVC window frames and have a distinctive, hook-shaped design. Cockspur handles have one screw that is used to secure the handle to the frame of the window and are not as secure as other types of window handles.
Handles that turn and tilt
In contrast to other handles made of upvc the tilt and turn handles can be turned to open the windows and turned inwards to allow to allow ventilation. In general, they feature a 7mm spindle on the back of the handle and are available in both left and right-handed versions.
When you are purchasing replacement handles for upvc it is essential to verify the length of the spindle as not all are the same size. To test the length of your upvc handle simply drop something in the middle of the hole, and then measure how far it extends before it comes into contact with an obstruction. This is the maximum size of spindle that will fit into your windows.
What is the spindle?
uPVC window handles function similarly like doors. By turning the handle, you will be able to operate a latch within the frame. The window is then opened and closed. These handles can be damaged, particularly if they’re frequently used or exposed to harsh environments. This can leave you needing to replace your uPVC windows handles as they might not be able to operate the window correctly for a long time.
There are many different types of uPVC handle options, including Espag, Cockspur, and Spaded handles. They are made in a variety of ways to fit into uPVC frames. Each handle type uses a different spindle to lock the window mechanism. This is why it is crucial to know the kind of handle is installed on your uPVC window so you can find the right windowpane replacement.
You can check what type of uPVC handle you are using by looking at the base section of the handle. A snap-in cover is over the screw that holds the handle’s base in position. Take it off and you should be able see the second holding screw located at the opposite end of the base of the handle. After both screws have been removed, you should be able remove the handle from the uPVC.
After taking off the uPVC handle, carefully remove it from the locking mechanism. Be sure to note the length of the spindle, as you’ll need to ensure that you purchase a replacement double glazed windows that has the same length as the original handle and locking mechanism.
The spindle wears out and is unable to operate the locking mechanism. This could be due to corrosion, damage from constant use or the locking mechanism becoming looser. If this happens, it will be necessary to replace the window handle and locking mechanism to restore the full functionality to your uPVC windows.
How do I take off the handle from the previous one?
In the course of time and daily use, window handles may become damaged or broken and if this happens it is essential to fix them as quickly as possible to ensure the security of your home. It is easy to replace a damaged or worn handle. The job can be accomplished in less than a minute without the need of special tools.
To remove the handle, first remove the screw located at the bottom of the handle. After this screw is removed, the handle will be removed from the base section. Another screw will be situated at the base of the handle. This can also be removed. After these two screws are removed, the handle can be removed from the window’s base.
After the handle has been removed, grab the new handle and line up the fixing holes with the holes that are present in the window frame. If there is a sticker or cap on the new handle, remove it if required and screw the handle in place. It is essential to ensure that the handle works once it is put in place. Turn the handle and make sure that the lock mechanism is activated.
Espag handles come with spindles that protrude out of the handle and slots into the multipoint locking mechanism that is on the frame of the window. Cadenza windows feature a blade with cutouts that are incorporated into the lock mechanism. Cockspur handles are long and are hung over the outer frame of the window or the transom bar crossmember.
Once you have installed the new handle, place the spindle inside the window lock and tighten it. Once the handle is firmly fixed in place then replace the snap-in cover and screw cap (if necessary). The handle is now ready to use, so try opening and closing the window a few times to ensure that it is working well and securely.
How do I install the new handle?
It’s not difficult to alter the handle on your Upvc windows. The procedure is simple. All you need is a screwdriver, and a little bit of patience. First, make sure that the old handle is unlocked. Remove any screws visible. You could also replace them with screw caps. Once the handle is removed, you need to make an note of the length of the spindle which protrudes from the back of the handle. This is crucial as it will determine the type of handle that you will require to purchase.
Espagnolette handles are the most common kind of handle that is used on uPVC windows. The spindle is inserted into the handle to operate the locking mechanism in the frame of the window. When the handle is turned it opens the latch on the window and allows it to open. As time passes and with regular use, espagnolette handles could be damaged or destroyed and it is necessary to find replacements.
Cadenza handles are a type of uPVC handle that is usually used with tilt and turn windows. They feature an extended blade that works the multipoint locking mechanism inside the window replacement companies. They are more secure than the espagnolette handle as they can only open from the inside. You can replace them with the same method as you would with espagnolette handles, but make sure the new handle is not angled and flat.
After you have picked the right handle, simply align the new handle with existing screw holes prior to screwing it into place. After that, you can put the screw covers on and test the new handle. You can accomplish this by moving the handle back and forth from the locked position to the unlocked one several times. It is possible to contact an expert to determine how you can fix any issues. They can often advise you on the best solution to resolve the issue in a speedy and effective way.
