uPVC Windows have been designed to last for a long time and provide durable solutions that can withstand the elements. Their moving parts may be damaged if not maintained regularly.
It’s good to know that fixing issues with uPVC windows is easier than you imagine. You can reap the benefits of an increase in thermal efficiency, enhanced security, and lower energy costs without having to replace your windows or doors.
Glass cracked
There are few things that irk homeowners more than finding cracked window glass. They can rob your home of the much-needed sunlight and make it difficult to keep the interior temperatures in check and comfortable. The good news is that chips and cracks in your windows can often be repaired without the need for replacement. Keep in mind that a small crack will likely grow when it is not taken care of. This can lead to the situation where the glass is damaged beyond repair and will have to be replaced altogether.
If you’ve noticed a window crack that isn’t too big, it may be possible to repair it with a simple bit of tape. A strip of masking tape that is placed along the length of the crack can stop it from getting worse. This is a great solution for cracks caused by temperature changes or stress. Double-sided tape will be needed for more extensive cracks, such as those caused by flying objects or impact breaks.
You can also try using a clear super glue to fill in the cracks. This is a more durable repair than the tape, but it’s not a permanent one. If you choose to go with this method of repair, first clean the broken pieces and then remove any larger ones that may have escaped from the window frame.
Mix the epoxy, which is a 50/50 mix of resin and hardener on an unrecyclable plate or cardboard in a well-ventilated place. After mixing it, you’ll have between 5 and 10 minutes to apply it. Utilize a putty knife to carefully apply the adhesive and gently press it into the cracks. Let the epoxy dry for at least five minutes prior to trying to get rid of any excess. If the epoxy is protruding from the surface then use a razor or acetone to clean it off and allow it to smooth. After the adhesive has completely cured, you can re-attach the stoppers to the window frame.
Water Leaks
It is important to fix the problem immediately if you notice water leaking from your windows. This can cause damage to your home. Depending on the location of the leak it is possible to repair the window, but in some cases it is essential to replace the entire window. If you are experiencing this issue, it’s likely that the sealant inside your double glazed window is worn out and a replacement unit is needed.
The friction stays are a common source of leakage through your uPVC windows. They’ve worn down and no longer allow you to fully close the window. If you are experiencing this issue it is recommended to speak with an expert in uPVC window repairs near me to arrange for a new set of friction stays to be fitted.
A final common problem that is encountered by homeowners with uPVC windows is condensation between the glass panes. This can be caused by various reasons, such as:
Condensation of the glass panes is usually caused by a problem with the window sealant but it can also be a result of an unintentionally damaged glass pane or the frame of the window. It could be feasible, based on the location, to repair the window. In other cases however, a replacement window repair near me is required. If the condensation is in a corner of the window, it could be possible to fix it by using silicone or other adhesives. If the condensation is in the middle of the window repair near me, it could be necessary to replace the whole window.
Locks that aren’t working
uPVC windows and doors are tough and long-lasting, however they are susceptible to damage over time. This is especially true for the moving parts, such as levers and springs. These parts can become totally worn out if they are not maintained regularly. They may even need to be replaced.
The lock on a door or window that isn’t turning is among of the most common problems. This could be caused by a variety of factors. It could be that the key is not being inserted properly or it could be due to an accumulation of dirt inside the lock. Lubricating the lock can aid in resolving this issue. It is also worth checking that the right key is used as this can often be a simple fix.
Locks that are not working properly pose a significant security risk and should be dealt with immediately. It is recommended to contact an expert locksmith and ask them to examine the issue. In some cases they can repair the lock, however in other cases, they might have to replace it.
If you have double-glazed windows this is not as much of a problem because it is rare for the glass to break or shatter, and therefore it can be repaired quite easily. However, if a single pane of glass has shattering or broken, a replacement window must be constructed.
It is important to remember that uPVC single pane windows are usually more efficient than wooden windows. Replacing them with new windows will save you money over time. They can also reduce the amount of condensation that forms between the glass panes.
Broken Hinges
uPVC windows can provide significant energy savings because of their double-glazed glass. However windows that are not working in the way it should or the hinges are broken, you could be losing valuable heat from your home. Windows that make a sound when the wind blows can be a sign that the sealant within the uPVC window is wearing off and it is time to purchase a new replacement.
You can fix the problem if the hinges or handles on your uPVC window are not closing properly. Cut a piece of dowel pin that is slightly smaller than the drilled hole and then taper the other end using sandpaper to ensure that it can fit into the stud easily. Apply glue to the sides and the stud hole of the dowel, and then pound the pin into the stud. Allow the glue time to dry before reinstalling the hinge and drilling pilot holes.
If your uPVC windows are starting to look old-fashioned or begin to show signs of wear and tear, it is worth considering replacing them rather than trying to fix them as this will save you money in the long in the long run. The replacement will also make your home look more appealing. If you are looking for modern uPVC window it is now possible to pick from a variety of colors so that it will be a part of the style of your home.
